1912 N. Broadway, Suite 106
Santa Ana, CA 92706-2621
Phone: (714) 285-0082
Fax: (714) 285-0030
Santa Ana, CA 92706-2621
Phone: (714) 285-0082
Fax: (714) 285-0030
|
Senior Project Manager - Transportation/Public Works Controls Engineer Electrical Engineer Mechanical Process Engineer Electrical Engineer, PE Civil Engineer, PE - Office Manager Electrical Engineering Manager, PE I & C Designers Piping Engineer, PE Solar Design Engineer Engineer (I-III) |
| Senior Project Manager - Transportation/Public Works |
| The Senior PM role is responsible for work performance on multiple transportation projects. Provides all necessary direction, supervision, coordination, and follow-up on the work to ensure quality standards are met, efficiency levels are maintained, and client satisfaction. Responsibilities Oversees project design and development; monitors project schedules, budget and profitability; completes project proposals; works closely with clients acting as client advocate and ensuring satisfaction; develops staffing plans and project fee estimates; assists with business development; maintains individual project chargeability/utilization at or above assigned goal level; trains, supervises, evaluates, and mentors team members. Ability to work in a team environment is essential. Requirements Must have a minimum of 15 years of experience in engineering and design with a focus on roadway, highway, transit design, and federal projects. Must have 5 or more years increasingly responsible supervisory experience. Must have a Bachelor's degree in civil engineering or related discipline and professional engineer (PE) registration required. This position requires knowledge in computer software utilized in the transportation industry - Highway/Roadway Design, InRoads Software, AutoCAD/MicroStation, Synchro/VISSIM. Must be familiar with Caltrans design and procedures, regulatory compliance and agency coordination, and familiar with the local engineering community. Please Send Your Resume to: Jobs@dtsjobs.com |
| Back to Top |
| Controls Engineer |
| Responsibilities Smart Plant Instrumentation specifically SPI/INTools will be required to perform work at local refinery expansion. Controls Systems/Instrumentation. Crude, Utility Water, Storage Tanks and Transfer Pump Units. Utilize SPInstrumentation / INTools for index, SPI Wiring for Junction Boxes, Marshalling Racks, PLC & DCS, Design Index & SPI Loops. ACAD utilized on location plans extracted from PDS, Equipment Layout, Schedules, Panel Layouts, Installation Details, Wiring Philosophies, preliminary cause & effects diagrams for modification by lead engineer & miscellaneous drawings for construction team. Specific knowledge of the NEC required. Use code to properly size and layout distribution equipment and devices. Detail motor connections, equipment control stations, layout distribution equipment and develop conduit routing in existing facilities. Understand short circuit requirements, know how to estimate short circuit, perform voltage drop calculations, conductor de-rating and connected load calculations. Outline electrical requirements necessary for an electrical construction package and estimate design hours required to complete. Estimate construction and installation costs. Smart Plant Review used for PDS model reviews. Interface and coordination with all discipline areas as well as interdisciplinary checking of packages. Heavy construction team multi-discipline interface and field interface team as well. Please Send Your Resume to: Jobs@dtsjobs.com |
| Back to Top |
| Electrical Engineer |
| Responsibilities Typically serves as a lead engineer, reporting to the department manager and/or project manager. Responsible for supervising and coordinating the electrical engineering and design team for a project or projects. Coordinates directly with internal and external team members and other discipline leads. Responsible for quality, schedule and budget performance. Typical engineering tasks will include conceptual power system design and analysis, equipment specification and procurement, engineering calculations including relay coordination, developing one-line diagrams and complex control schematics. Requirements P.E. License (California) Required, B.S. in Electrical Engineering. 10+ years experience supervising an engineering/design team for power and control systems for industrial facilities. Experience with refinery/petrochemical projects strongly preferred. Familiar with U.S. industry standards including API,NFPA,IEEE, etc. Experience with software-based electrical systems analysis tools and with basic AutoCAD functions. Please Send Your Resume to: Jobs@dtsjobs.com |
| Back to Top |
| Mechanical Process Engineer |
| Responsibilities Performs Facilities/Pipeline Operations. Recommendations for vapor recovery system problems at various facilities, enhanced oil recovery, withdrawal and dehydration system problems, new dehydration and gas processing facilities, hydrocarbon/water condensate and hydrate problems in gas distribution system, trace constituent control and remediation. Engineering Design and/or Analysis. Preparation and/or development of natural gas processing system designs. Development and/or evaluation of laboratory analyses, computer simulation, and other technical information or processes. Evaluation and recommendation in the area of natural gas combustion processes and odorization. Natural Gas Vehicle (NGV) Applications. Support station installations, purification system design and evaluation, and trace constituent research and analyses. Requirements 8 - 15 years of hands-on experience in oil and gas facilities. Demonstrated success in troubleshooting process equipment and systems, designing process plants and conducting HAZOP reviews. Experience working with field/plant personnel, Knowledge of process plant components such as two/three phase separators, absorption and distillation towers, compressors, pumps, heat exchangers, coolers, heaters, refrigeration units, fin-fan coolers, pipe flow, vapor recovery systems, etc. Knowledge of process simulation software (e.g. Process, Hysim, ChemCadII). Knowledge of combustion, corrosion control and process instrumentation. Please Send Your Resume to: Jobs@dtsjobs.com |
| Back to Top |
| Electrical Engineer, PE |
| Responsibilities Perform studies related to the future use, capacity expansion, and generator interconnections, as well as studies related to operational flexibility and system efficiency of the distribution system. Uses power flow and transient simulation models to study steady state and dynamic operation of the electric distribution system, to meet forecast load and operating conditions while complying with all applicable standards, regulations, and system constraints. Requirements Electric Distribution System planning experience. Professional Engineer designation preferred. Please Send Your Resume to: Jobs@dtsjobs.com |
| Back to Top |
| Civil Engineer, PE Office Manager |
| Responsibilities Civil Engineer to work as a office engineer and project coordinator preparing detailed work related to the design of water, sewer and storm drain systems, hydraulic system, grading plans public works facilities. Responsible for the management of project schedules, monitoring man-power allocations and coordinating work on multiple in-house projects while assisting with certifying work done in the field and approving work completed. Will oversee, direct and mentor design team and manage the multiple projects. Must be able to do hands-on project engineering and design using AutoCAD/ CIVIL3D. Will be doing plan checking on heavy conceptual, preliminary and precise grading plans for public and private sites. Please Send Your Resume to: Jobs@dtsjobs.com |
| Back to Top |
| Electrical Engineering Manager, PE |
| Responsibilities Required to organize a department design teams, and develop standards and guides for department.s engineering activities. Reviews and monitors Department personnel performance and recommends salary and grade adjustments. Assigns personnel to projects and directs training. Assists in Project Proposal preparation, and functions as the Electrical expert during Project Proposal presentations. Set Department design team goals, monitors the quality of the work performance within the Department and make design and/or corrective decisions as required. Approve electrical design criteria, reports, drawings, construction specifications and time sheets, serves as mentor to junior level personnel. Management, supervisory experience required, BS or MS in an engineering discipline Professional Engineer license is required Project Engineering or Project Management experience preferred demonstrate a familiarity with related documentation, industry codes, guides, and standards (i.e., NEC, IEEE, API, ANSI, NEMA, NACE, IEC). Please Send Your Resume to: Jobs@dtsjobs.com |
| Back to Top |
| I & C Designers |
| Responsibilities Must be able to design and layout of instrument and control systems and familiar with facility I&C standards, vendor equipment and the ability to size conduit and wire for low voltage instrument and control circuits. Knowledge with terminal boxes, marshalling cabinets, conduit fittings and materials required for instrument connections, etc. Must have field experience in the petroleum refinery environment and be familiar with the use and care of personal safety equipment. Familiar with equipment including Distributed Control Systems, Programmable Logic Controllers prefer experience in Delta V, SPInstrumentation and INtools. Please Send Your Resume to: Jobs@dtsjobs.com |
| Back to Top |
| Piping Engineer, PE |
| Responsibilities Responsible for the complete piping design and engineering on a major project or multiple small projects. Will have supervisory and administrative responsibility over a large group of engineers and designers and assuring the effective utilization of engineering personnel, and their technical responsibilities. Performs calculations and evaluations in the design of industrial facilities and determine the overall scope, budget, construction estimate and schedule for assigned projects. Prepare manpower and man-hour estimates, participate in planning, cost development and management, and scheduling for assigned projects. Will ensure that construction and installation conform to functional specifications, codes and standards of customer requirements. Will required effective communication with project team members and with the customer. BS or MS in an engineering discipline, PE registration required. Knowledge and application of ANSI B31.1 and B31.3. Knowledge, application and specification of piping materials. Design of complex piping systems, especially those systems unique to the industry being served. Knowledge of manual valve sizing, use and application. Knowledge and application of piping supports and restraints will require individual to have knowledge of AutoCAD, MicroStation and use of a 3D software platform such as Plant 3D or similar. Proficient use of stress analysis software such as CEASAR II and Microsoft applications. Please Send Your Resume to: Jobs@dtsjobs.com |
| Back to Top |
| Solar Design Engineer |
| Responsibilities Electrical Solar Design Engineer with knowledge and experience in the area of solar system design including: preliminary design, site surveying and job walk, shading analysis, system size calculation, expected system output calculation, PV Watts, local city and county codes, California Electrical/Building/Fire Codes, NEC, AC/DC, preparing full permit packages, pulling permits, BOM and ordering of materials, system development from start to finish, system troubleshooting, field visit and installation inspection, etc. CADD experience is a plus preferable AutoCAD or ProE. Working with commercial roof-mounted, ground-mounted and pole-mounted solar-powered systems from a few kilowatts up to 3 Megawatts. Coordinated project development from inception to conclusion including: measurement, site evaluation and job walk, design, permitting, bill of material, installation, and field inspection. Conducted site surveys and job walks for projects, specially commercial jobs and ground-mounted systems and created full permit packages including cover sheet, site plan, roof plan, elevation views, single line diagrams, cut sheets, and submitted plans. Please Send Your Resume to: Jobs@dtsjobs.com |
| Back to Top |
| Engineer (I-III) |
| Responsibilities With some general guidance, responsible for the engineering/design of overall control systems. Develops and recommends estimates, budgets and schedules. Offers general assistance with project work. Provides solutions to a variety of technical problems of moderate scope and complexity. Key Attributes
|
| Back to Top |
 |
Follow DTS on  |